Your needs, this model
Does it fit your priorities?
Can the P115 be used outdoors?
No. TP-Link warns against damp or outdoor use. This assessment is for indoor outlets only.
Explore this need in the finder →Does the P115 report energy in the app?
Yes. TP-Link documents consumption tracking and cost estimates in the Tapo app; the checked sources do not establish measurement accuracy or a guaranteed saving.
Explore this need in the finder →Is 15 A the right figure for every connected load?
No. The V1.6 datasheet separates 15 A/1,800 W general-resistive use, 8 A incandescent, and a 1/6 hp motor ceiling. Confirm the appliance nameplate and its own instructions.
Explore this need in the finder →Assessment basis: this is a document-based review of the US Tapo P115 two-pack route. I have not installed, measured, operated or load-tested the plugs. TP-Link's US catalogue identifies the route as a two-pack, and the product page's package field says P115 ×2. The corresponding four-pack is a separate route and is not interchangeable with this package record.
Energy reporting without the P110M Matter route
The P115 is an indoor, one-outlet Wi-Fi plug with Tapo energy statistics and routine controls. TP-Link lists Alexa, Google Assistant and SmartThings for this US product. I found no manufacturer evidence on the reviewed P115 materials that this exact model supports Matter or Apple Home, so do not infer either from a different Tapo model. The distinction is important: the P110M has a separate Matter-capable route, while the P115 is assessed here only for its own documented ecosystem list. The product describes 2.4 GHz Wi-Fi and Bluetooth for setup. Tapo is the primary documented app for energy reporting, schedules, countdown/Auto-Off and Away Mode. Energy estimates and graphs are app features; the checked documentation gives no independent accuracy tolerance or laboratory comparison. They can help observe reported consumption but should not be treated as a calibrated instrument, safety monitor or guaranteed bill-reduction measure.Electrical limits are not one interchangeable number
For general/resistive loads, TP-Link lists up to 15 A / 1,800 W. Its support-linked P115 datasheet separately lists an 8 A incandescent limit and a 1/6 hp motor ceiling. Use the relevant appliance class and its own instructions; don't infer that any device below 1,800 W is suitable. A motor's horsepower and startup behavior matter, and incandescent lamps have a lower stated current allowance. These figures are per plug, not summed across the two-plug package. The page lists body dimensions that differ between official materials: its route and the datasheet disagree on height, while width and depth are consistent. The review records width 1.5 inches and depth 1.6 inches, but leaves height unknown for numeric matching. In any case, nominal body dimensions cannot confirm whether a plug blocks the neighboring outlet or strains a cord. Measure the wall plate, other receptacle, cord bend and furniture clearance and keep the plug accessible.Local access is a narrower promise
TP-Link describes access to configured Tapo devices over the local home network when the internet connection is unavailable. That is a useful but limited condition. It does not promise remote-from-away control without internet, first-time setup without the required network, operation without local Wi-Fi/router service, or continued voice-assistant access during an outage. A buyer who needs a particular outage behavior should check that exact control path, not rely on the broad label “local.” TP-Link specifies indoor use only. The P115 is not documented as suitable for rain, damp environments or outdoor outlets. The product page also lists automatic scheduling, countdown timing and Away Mode; these address different routines, and an automation should be checked against the connected appliance's operating requirements.Who should shortlist this two-pack
Consider the P115 when two separate indoor loads fit the individual electrical limits and Tapo energy reporting and schedules are useful. It is a poor fit for outdoor locations, loads beyond the applicable class limit, or buyers requiring documented Matter/Apple Home support or energy data in a third-party app. It is not a substitute for an electrician's assessment of outlet condition, circuit capacity or appliance suitability. The P115 support page lists several hardware branches, but the route does not identify the exact suffix a seller will ship. TP-Link also has support links that do not resolve cleanly to P115-specific PDFs: a purported P115 user guide downloaded as a P110 guide, and a multi-pack guide downloaded as a P105 guide. Those files were excluded from the model assessment rather than treated as P115 evidence. Confirm the seller's US model, version, package count and instructions. The exact-name CPSC query checked here returned no listed records at the time; this narrow result is not proof of safety or future status. The assessment is based on manufacturer documents and a route image, not personal experience, testing, reliability observations or current seller availability.Key specifications
Key details at a glance
| Maximum current | 15 A |
|---|---|
| Maximum published watts at 120 V | 1800 W |
| Body width | 1.5 in |
| Body depth | 1.6 in |
| Indoor use only | Yes |
| Outdoor rating | No |
Use the exact model’s instructions for operating limits, supplied equipment and version differences.
Sources for this review
Sources for this assessment
Check the exact version against your own outlet
The finder checks documented ratings and features; it cannot approve your appliance, outlet wiring or physical clearance.