Model assessment · Meross

Meross MSS425F Smart Wi-Fi Power Strip (US/JP) review

One indoor US power strip with four separately controlled AC outlets, four grouped USB ports and a 15 A shared AC ceiling. The USB group is rated up to 4.0 A total.

Sources checked 2026-10-31 · Our editorial approach

Review the exact model, limitations and buying checks on BuyerShortlists before choosing a seller. We may earn from qualifying purchases.

Official Meross image of one white MSS425F US/JP strip with four AC outlets, four USB ports and a fixed cord.
Official image of one Meross MSS425F US/JP strip. Meross
A useful fit for

A plausible document-based candidate for a dry indoor desk or equipment area needing individually controlled AC outlets plus a grouped USB bank, provided the total AC load and long strip body suit the installation.

The main tradeoff

The 15 A maximum applies to the complete strip, and the checked US page gives no separate per-socket rating, 120 V watt ceiling, motor limit or named load class. USB output is grouped and capped at 4.0 A total. The exact manual limits use to a dry indoor location; no surge-joule performance is claimed.

Your needs, this model

Does it fit your priorities?

Can the four USB ports be controlled separately?

No separate USB switching is documented: the MSS425F page lists four USB ports with one shared 4.0 A group maximum, while the four AC outlets have separate controls. One USB port is listed for up to 2.4 A; the four-port group is not four independent 4 A outputs.

Explore this need in the finder →
Does the 15 A figure apply to every AC outlet?

Meross gives 15 A for the US/JP strip, not a separate 15 A ceiling for each socket. Treat it as a shared strip limit, add simultaneous loads conservatively and check the appliance label; no separate per-outlet watt, motor or load-class rating was found.

Explore this need in the finder →
Can the MSS425F be installed outdoors or in a damp area?

No. The exact MSS425F US manual recommends indoor use in a dry location only. Four outlets, USB ports and a HomeKit mark do not establish any moisture rating.

Explore this need in the finder →

The Meross MSS425F US/JP route is a smart power strip, not a bundle of four plugs. Meross's US product page describes one strip with four AC outlets and four USB ports. This assessment uses the US-specific specifications and the matching English MSS425F manual; it does not borrow seller details from the separate MSS425FHK US store edition. No exact seller SKU or present stock state for this unsuffixed US/JP route was established.

Four switched outlets, but only one shared strip limit

The most useful distinction is between outlet control and electrical capacity. Meross says each of the four AC sockets can be controlled, while the USB bank is a separate group. That layout is more flexible than a strip where everything turns off together, but it does not create four independent 15-amp circuits. The published US/JP output limit is 15 A for the complete AC strip. The page does not publish a separate outlet-current ceiling, an individual watt limit, or a motor horsepower rating. Treat 15 A as the shared boundary across connected AC loads, and check the exact appliance label and instructions before plugging in heaters, motors, or other demanding devices. The four USB ports are not four high-current chargers. Meross lists up to 2.4 A for one port and up to 4.0 A across the whole USB group. The page does not describe per-port remote control; its one USB power indicator and group limit support treating them as a bank. A buyer who needs each USB port independently switched or needs a verified charging protocol should confirm those details elsewhere rather than infer them from the port count. Meross calls the product a surge protector and describes an overload-protection mechanism, but the checked US page does not give a joule rating or clamping specification. Those marketing terms do not provide enough information to compare surge-energy capacity. If surge suppression is the primary purchase reason, check the label and a current exact-model technical listing before choosing it.

Control choices depend on which app does what

The exact product page lists Apple Home, Alexa, Google Assistant, and SmartThings, alongside Meross-app setup over 2.4 GHz Wi-Fi. It also documents schedules and an auto-off timer for the outlets and USB group. Meross's separate routine guidance shows recurring weekday/weekend examples. These are useful capabilities for lights or accessories that should switch at a chosen time, but the evidence places the schedule and timer workflow in the Meross app. It does not establish identical schedule controls in Apple Home or every named voice platform. The page says no additional hub is needed for the listed setup, but Apple Home remote access has its own home-hub requirement. Network availability also matters: the strip is a 2.4 GHz Wi-Fi product, and the manufacturer excludes enterprise Wi-Fi. The checked sources do not establish Matter support, energy monitoring, randomized Away Mode, or app control after an internet outage. A compatibility logo should not be read as evidence for those other features.

Measure the strip and the cable route

The US body is listed as 12.2 inches wide, 2.4 inches deep, and 1.4 inches high, excluding its fixed 6-foot cord. This is a long strip body rather than a wall-hugging mini plug. Measure the wall receptacle, nearby furniture, the direction of the cord, and the plug heads that will occupy the outlets. The body dimensions do not specify required clearances, and the strip may cover more of a wall area than expected when mounted or placed behind a desk. The exact US manual recommends indoor use in a dry location only. It is not an outdoor-patio choice, even though its product name includes “surge protector” and it has multiple ports. The documentation also does not make a load class or motor rating explicit. The matcher therefore does not treat a general current value as proof of suitability for every appliance.

What to verify before selecting an offer

First confirm the model spelling. The official store listing found during this review names MSS425FHK, while the source product page and manual identify MSS425F US/JP. The HK suffix is a distinct route; do not assume a search result with a similar picture is the unsuffixed configuration. Then confirm that the retailer's package is one complete US strip, not an accessory, a different regional version, or the separate HK edition. For a dry indoor setup with four independently switched AC sockets and grouped USB charging, the MSS425F's layout may be worth comparing. Its shared 15 A ceiling, unspecified individual socket limit, long body, lack of a stated motor rating, and app-specific routine caveats are meaningful tradeoffs. This is a document-based assessment from manufacturer information, not a hands-on test, load measurement, USB measurement, or claim of ownership.
Key specifications

Key details at a glance

Controlled outletsSmart power strip
Reviewed packageOne US MSS425F Wi-Fi surge-protector strip with four AC outlets, four USB ports and a fixed 6 ft / 1.8 m cord; the product-page package list includes one strip and one manual.
Maximum current15 A
Body height1.4 in
Body width12.2 in
Body depth2.4 in
Network and protocolIEEE 802.11 b/g/n, 2.4 GHz Wi-Fi; the exact page says enterprise Wi-Fi is unsupported.
Indoor use onlyYes
Outdoor ratingNo
Schedules documentedYes
Countdown timer / auto-offYes

Use the exact model’s instructions for operating limits, supplied equipment and version differences.

Sources for this review

Sources for this assessment

Check the exact version against your own outlet

The finder checks documented ratings and features; it cannot approve your appliance, outlet wiring or physical clearance.

In this review