Your needs, this model
Does it fit your priorities?
Does the MSS115 include energy monitoring?
No. Meross's US MSS115 page lists Energy Monitor: No. It is a Matter switch with a 15 A maximum, not an energy-reporting plug; a high current rating does not imply power or consumption statistics.
Explore this need in the finder →Will the MSS115 remain reachable when the internet goes down?
Meross's MSS115 article describes local-network access through Matter during an internet outage, after setup, with the device and controller still on the household LAN. That does not help if the Wi-Fi router or local network fails, and it is not a promise of control from away.
Explore this need in the finder →Can I treat a 15 A rating as approval for any appliance?
No. The US technical page lists a 120 V input and 15 A maximum, but the checked exact-model sources do not state an appliance load-class or motor horsepower limit. Check the appliance instructions and nameplate; the two-pack gives each plug a separate 15 A ceiling, not a combined allowance.
Explore this need in the finder →Assessment basis: this is a document-based review of the Meross MSS115 US/CA two-pack. I have not installed or operated it, measured outlet clearance, or tested any load or Matter controller. The official store identifies this package as two MSS115 plugs; the technical specification is for one plug, so the package count does not multiply its rating.
Two small switches, one rating per plug
Each MSS115 is a single-outlet, Wi-Fi Matter plug for a 120 V supply. Meross lists a maximum output of 15 A. At 120 V that corresponds to 1,800 W as an arithmetic ceiling, but the checked technical page does not give a motor horsepower rating or identify a general/resistive load class. A numeric maximum is not a universal approval for an appliance: check the appliance's own nameplate and instructions, especially for a motor, compressor, heating element or lamp. The pair supplies two independent plug bodies; it does not make one 30 A switch or increase the rating available to either plug. The listed body is 1.9 × 1.9 × 1.2 inches (width × depth × height), excluding the plug pins. That is a compact footprint on paper, but it is not a clearance guarantee. A socket face, wall plate, neighboring adapter or stiff appliance cord can still interfere. Measure the actual receptacle and leave access to the side button. The product is not advertised with an outdoor rating; this assessment treats it as a dry indoor plug rather than assuming that a covered porch makes it weather suitable. Meross explicitly lists no energy monitor. If you want an app graph of power consumption, an energy-reading plug is a better fit; Matter and a 15 A rating do not imply measurement capability. Conversely, energy data is not automatically more useful than a clear load rating: decide whether the need is switching, compatible app control, or actual consumption reporting before paying for a model family.Matter is a platform path, not a promise of every app feature
The MSS115 is one of Meross's Matter plugs. Its manufacturer material names Apple Home, Alexa, Google Home and SmartThings, while the US product page calls for 2.4 GHz Wi-Fi and IPv6. Meross's Matter guidance also describes compatible platform controllers and recommends completing setup with the Meross app. Check your specific phone, router, Matter controller and platform version before relying on a cross-platform setup. Matter does not mean the same menus, energy features or routines are exposed in every app. The control paths matter here. Meross describes Matter devices on the local network as remaining accessible through an internet outage after they are configured. That is a local-network claim: it assumes the router and home network still work and does not mean remote control from away survives an internet outage. Meross also describes custom schedules and a timer function for this plug; its general app FAQ distinguishes scheduling from auto-off timing. The sources I checked do not state a weekly recurrence setting for the MSS115, so I do not count it as a confirmed weekly-schedule model. Away Mode is not established either. The Matter pairing instructions are more consequential than a broad “works with” list. Meross says to keep the device on a supported 2.4 GHz network with IPv6, enable Bluetooth permission for setup, and use a compatible Matter controller for a third-party platform. The setup page enumerates supported controller/software requirements and notes that a device added to multiple Matter systems uses a multi-admin sharing process. Keep the QR/setup code and confirm which app or controller will own initial commissioning. This model is not a drop-in upgrade path for every older Wi-Fi smart plug.Where it makes sense—and where the evidence stops
The two-pack is most relevant when you want two simple, separately located indoor switches that can join a Matter home and do not need energy readings. It can be less compelling for someone who needs a documented weekly timer, remote-access guarantee, outdoor enclosure, or a motor rating. Those missing facts are not proof that the product can never work in such a setup; they are reasons not to treat the checked material as confirmation. Meross's exact US page lists 15 A maximum, while the product package names the US/CA version. Confirm the printed model and the matching US plug before purchase; a photograph of a family member or a retailer's abbreviated title is not enough to establish package count or revision. The check should also include the appliance voltage and current, load type, outlet space, available IPv6 Wi-Fi and the controller you actually plan to use. For an energy-focused indoor setup, compare this with the Tapo P110 V1 assessment, which documents an app energy view but uses a different app, protocol and load-limit table. For a general appliance or a motor, compare only products with an explicit class-specific rating. The MSS115's Matter interoperability is its distinguishing workflow, not evidence that every appliance or automation is suitable. This review reports manufacturer material only; it makes no hands-on, reliability, measurement-accuracy or safety-testing claim.Key specifications
Key details at a glance
| Controlled outlets | One controlled outlet per plug |
|---|---|
| Reviewed package | US/CA two-pack: two distinct MSS115 Matter mini plugs, one controlled AC outlet per plug. |
| Maximum current | 15 A |
| Maximum published watts at 120 V | 1800 W |
| Body height | 1.2 in |
| Body width | 1.9 in |
| Body depth | 1.9 in |
| Network and protocol | Matter over an existing 2.4 GHz Wi-Fi network with IPv6; Meross lists phone OS minimums of iOS 16.1 or Android 8.1. Its Matter setup guidance also calls for Bluetooth permission and a compatible Matter controller for a third-party platform. |
| Indoor use only | Yes |
| Outdoor rating | No |
| Schedules documented | Yes |
| Countdown timer / auto-off | Yes |
Use the exact model’s instructions for operating limits, supplied equipment and version differences.
Sources for this review
Sources for this assessment
- Meross official Smart Plug and Switch catalog, MSS115 US route
- Meross MSS115 US Matter Smart Plug Mini technical page
- Meross Official Store MSS115 US/CA 2-pack product listing and SKU
- Meross official MSS115 Matter features and control article
- Meross FAQ on on/off schedules and auto-off timers in the Meross app
- Meross MSS115 user manual
- CPSC SaferProducts exact-name MSS115 query, retrieved 2026-10-30
Check the exact version against your own outlet
The finder checks documented ratings and features; it cannot approve your appliance, outlet wiring or physical clearance.
